This kit includes Dual Pro’s B.O.S. Battery Optimization System - 12V - 2-Bank (PN: BOS12V2) and Dual Pro’s RealPRO Series Battery Charger - 18A - 3-6A-Banks - 12V-36V (PN: RS3).
B.O.S. Battery Optimization System - 12V - 2-Bank
B.O.S. actively shuttles energy between batteries to keep “the pack” balanced, increasing battery strength and longevity.
Batteries in a pack will become “out of balance” and the pack is only as good as its “weakest link”. In watercraft applications, this is further compounded when the trolling motor battery is used for peripherals and/or to assist the cranking battery.
B.O.S. actively shuttles energy as needed between batteries wired in series to ensure equal voltage before, during, and after charging.
B.O.S. keeps packs balanced, enabling maximum performance, and quadruple run time on the water.
Premature battery failure due to an unbalanced pack has been, unfortunately, accepted as the ‘norm’ for decades. The B.O.S. answers this call with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack, as well as increasing run times.
Features:
Available in 6V, 8V, and 12V configuration
Up to six batteries in a series
Battery Selection and Prediction (BSAP-24) algorithm
Less than 1mA sleep mode
Transfer rate up to 7.5A
Self-powered
Any type of battery chemistry
Used in Any Application Where Batteries Are in Series:
Marine
Golf
Industrial
Aerial Equipment
Solar Power
Electrical Vehicles
Communications
Defense/Military
RealPRO Series Battery Charger - 18A - 3-6A-Banks - 12V-36V
RealPro Series battery chargers (formerly Recreation Series) are an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier-duty and higher amperage product.
It is designed for use in many types of applications including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similar uses. The system delivers sophisticated capabilities and superior value to customers.
Battery Charging Systems Designed for Everyday Applications:
Affordable, Reliable, and Safe
Unmatched Performance, Reliability, Safety and Quality
TROUBLE FREE – Just Plug It In and Forget It!
Join Over 750,000 of Dual Pro’s Satisfied Customers!
Wide Variety of Applications
Universal Input (100-240 VAC 50/60HZ)
Features:
Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
Designed for use in fresh and saltwater
Dependable, rugged construction and waterproof
Independent outputs and fully automatic
Battery maintenance mode
Two-year warranty
DC charge cables = 5ft and AC power cord = 3ft
Approved and meets ISO 8846 Marine standards
Models available to charge 12-24V systems
LED lights indicate “Each Battery’s” state of charge
Reverse polarity protected and no installation restrictions
Small, easy to handle, and does an amazing job of both inflating and delating large fenders and low-pressure inflatable items. Only inflates to 1 psi (enough for the fenders) The 20V battery last a long time. I use a 2 stage pump for inflating the items which require 6 to 15 psi of pressure but, I use this pump to deflate the high pressure toys because it is convenient.
Not sure why they designed it the way they did, but the straps should be attached to the fender. They are very difficult to attach to the piling while holding and bending the fender to fit the piling. Once installed it’s also difficult to pull the straps tight enough so it doesn’t slide down the piling. Once installed it works fine and protected our rail from scraping so if you can install it, you’ll enjoy it.